Abstracts – Browse Results
Click on the titles below to expand the information about each abstract.
Viewing 22 results ...
Ahmed, H I (2023) Mechanical Behavior, Microstructure, and Chloride-Penetration Resistance of Glass Waste Nanopowder Magnetic Concrete. Journal of Construction Engineering and Management, 149(01).
Amies, P, Jin, X and Senaratne, S (2023) Systematic Literature Review on Success Criteria for Dam Engineering Projects. Journal of Construction Engineering and Management, 149(01).
Barkokebas, B, Al-Hussein, M and Hamzeh, F (2023) Assessment of Digital Twins to Reassign Multiskilled Workers in Offsite Construction Based on Lean Thinking. Journal of Construction Engineering and Management, 149(01).
Hosseinian, S M and Tavakoli, M (2023) Markets, Hierarchies, or Hybrids as Alternative Governance Structures in Construction Contracts: Transaction Cost Economics Analysis. Journal of Construction Engineering and Management, 149(01).
Hu, F, Liao, R and Chen, J (2023) Calculation Methods to Optimize the Number of Pedestals and Evaluate Production Plans for Precast Yards Fabricating Prestressed Bridge Beams and Precast Segments for Poststressed Segmental Erection. Journal of Construction Engineering and Management, 149(01).
- Type: Journal Article
- Keywords: Production planning schemes; Calculation method of the number of beam pedestals; Evaluation method; Multiobjective constraints; Quantitative evaluation indexes;
- ISBN/ISSN: 0733-9364
- URL: https://doi.org/10.1061/(ASCE)CO.1943-7862.0002404
- Abstract:
Currently, the published methods used to optimize the number of beam pedestals in a precasting yard for bridge beams or segments do not consider all relevant constraints. Therefore, an optimal calculation method based on multiobjective constraints is proposed. The constraints used are the demand plan for erecting beams, the minimum beam storage time, and the actual beam storage time. Two cases were considered based on the relationship between the minimum and actual storage times. When the minimum storage time of the finished beams was equal to the actual storage time, the minimum number of pedestals could be determined through the stage of maximum demand. When the actual storage time of the finished beams exceeded the minimum storage time, multiobjective constraint equations for the production and demand plans of each stage were established, and a logic algorithm is proposed to calculate the minimum number of pedestals. In addition, to identify the appropriate production plan, an optimization method is proposed based on three evaluation indexes: vacancy rate, dispersion, and core area. Taking one project as an example, the minimum number of platforms and optimized production plans were obtained using the proposed method. A complete set of planning processes, including calculation analysis and scheme comparison, is presented in this paper. The results demonstrate that the proposed methods are applicable and can provide a theoretical reference for the optimization of precast yards for bridge construction projects.
John, S T, Sarkar, P and Davis, R (2023) A Long-Range Wide-Area Network System for Monitoring Early-Age Concrete Compressive Strength. Journal of Construction Engineering and Management, 149(01).
Khalef, R and El-adaway, I H (2023) Identifying Design-Build Decision-Making Factors and Providing Future Research Guidelines: Social Network and Association Rule Analysis. Journal of Construction Engineering and Management, 149(01).
Lee, D, Wen, L, Choi, J O and Lee, S (2023) Sensor-Integrated Hybrid Blockchain System for Supply Chain Coordination in Volumetric Modular Construction. Journal of Construction Engineering and Management, 149(01).
Liang, R, Xue, Z and Chong, H (2023) Risk Evaluation of Logistics Park Projects’ Lifecycle during the COVID-19 Pandemic: Failure Mode and Effects Analysis. Journal of Construction Engineering and Management, 149(01).
Liu, T, Mao, Y and Lu, S (2023) Fostering Participants’ Collaborative Innovation Performance in Megaprojects: The Effects of Perceived Partners’ Non-Mediated Power. Journal of Construction Engineering and Management, 149(01).
Lohne, J, Klakegg, O J and Lædre, O (2023) Understanding the Potential for Criminal Activity in the Norwegian AEC Industry: A Building Process Perspective. Journal of Construction Engineering and Management, 149(01).
Mei, X, Zhou, X, Xu, F and Zhang, Z (2023) Human Intrusion Detection in Static Hazardous Areas at Construction Sites: Deep Learning–Based Method. Journal of Construction Engineering and Management, 149(01).
Murguia, D, Vasquez, C, Demian, P and Soetanto, R (2023) BIM Adoption among Contractors: A Longitudinal Study in Peru. Journal of Construction Engineering and Management, 149(01).
Okpala, I, Nnaji, C and Gambatese, J (2023) Assessment Tool for Human–Robot Interaction Safety Risks during Construction Operations. Journal of Construction Engineering and Management, 149(01).
Ryu, J, Banting, B, Abdel-Rahman, E and Haas, C T (2023) Ergonomic Characteristics of Expert Masons. Journal of Construction Engineering and Management, 149(01).
Suárez, J L, Gosselin, L and Lehoux, N (2023) Optimizing Modularity of Prefabricated Residential Plumbing Systems for Construction in Remote Communities. Journal of Construction Engineering and Management, 149(01).
Wang, J, Zhang, S, Fenn, P, Luo, X, Liu, Y and Zhao, L (2023) Adopting BIM to Facilitate Dispute Management in the Construction Industry: A Conceptual Framework Development. Journal of Construction Engineering and Management, 149(01).
Wang, P, Wang, K, Huang, Y, Zhu, J, Fenn, P and Zhang, Y (2023) Payment Issues in China’s Construction Industry: Nature, Causes, and a Predictive Model. Journal of Construction Engineering and Management, 149(01).
Wang, T and Feng, J (2023) Optimal Review Strategy for Concurrent Execution of Design–Construction Tasks in DB Mode. Journal of Construction Engineering and Management, 149(01).
Yang, W, Zhang, F, Wang, H, Wu, J, Nie, Z and Li, L (2023) Synchronous Control Theory and First Test of Time-Varying Upper Operation and Chassis Attitude Maintenance for Truck Cranes. Journal of Construction Engineering and Management, 149(01).
Zeng, N, Liu, Y and König, M (2023) 4D BIM-Enabled Look-Ahead Scheduling for Early Warning of Off-Site Supply Chain Disruptions. Journal of Construction Engineering and Management, 149(01).
Zhang, X, Liu, T, Rahman, A and Zhou, L (2023) Blockchain Applications for Construction Contract Management: A Systematic Literature Review. Journal of Construction Engineering and Management, 149(01).